R-260-e

                     M A T E R I A L - D A T A S H E E T

R-260   M O S S - R E M O V E R

Brief instructions :                                   01.01.10
R-260 Moss Remover removes algae and moss from natural stones.

Prerequisites :
The surface to be treated should have a minimum temperature of 15°C (optimum temperature 20°C) in order to favorably affect the action of the moss remover.

How to use :
Apply R-260 Moss Remover evenly over the surface to be treated, leave to react for about 15 minutes.
Wash off the loosened moss with cold water at high pressure (max. 60 bar) or scrub the treated surface and rinse with plenty of water.
Repeat the treatment if necessary until complete removal of the moss.
Dilute a clean solution of Moss Remover in the same ratio with water and apply it on the natural stone surface. Leave it to react for approx. 2 days before impregnating the treated surface.

Environmental protection :
The loosened moss may enter the sewage system since the residual product is 90 % biodegradable.

Consumption :
Apply approx. 30 ml Moss Remover on 1 m².

Recommendation :
After drying of the treated surface the latter may be impregnated using I-231 Impregnation in order to considerably delay new growth of moss.

Safety :
R-260 Moss Remover is not a hazardous product and is not subject to the Regulations on Dangerous Goods. It is nonetheless a chemical product and must be kept out of reach of children and stored away from pets and food.

Storage stability:                 Coverage:                      Drying time :
approx. 2 year                                                                  approx. 30 minutes

Our directions for use are only general recommendations to be checked on site for each specific use.

back